Wheeling Steel Corporation’s Benwood Works is a former pipe mill in Benwood, West Virginia. It closed in 1984.

Riverside Iron Works

Riverside Iron Works began in 1852 when E.C. Dewey moved to Benwood from Cadiz, Ohio. 18 Dewey constructed the Eagle Wire mill at the head of 25th Street, which contained five boiling and two heating furnaces. It produced wire and iron axles.

In 1855, the mill was idled. It was restarted in 1858 by J.H. Pendleton & Company, making light bar iron and railroad spikes. 18 The facility burned in 1859 but was rebuilt and leased to O.C. Dewey, J.N. Vance, and W.H. Russell under the firm Dewey, Vance & Company in 1860. It operated as the Wheeling Iron and Spike Works and the Juniata Iron Works.

The company built a nail mill in 1866, purchasing land adjacent to the Belmont mill at Main and 24th streets. 18 Named “Riverside” due to its location along the Ohio River, it opened in December 1867 with 48 nail machines. An extra 42 nail machines were added in 1870.

On January 1, 1875, Riverside Iron Works was organized, replacing Dawey, Vance & Company, with a capital stock of $1 millon. 18 The company was under the leadership of William L. Hearne and his son, Frank J. Hearne. By 1880, William Hearne had retired and Frank Hearne became the new general manager. 19

The Riverside blast furnace made its first cast of iron on February 14, 1872. 18 The furnace, 75 feet high by 10 feet in diameter, had four Player iron pipe stoves, ten boilers, and two blowing engines. It produced 1,000 tons of iron weekly.

An 1882 iron puddlers’ strike allowed Hearne to experiment with one of Riverside’s main products: iron cut nails. 19 Hearne had learned of the Bessemer steel production process, which required fewer raw materials and labor, that resulted in steel, a superior product over iron. Hearne attempted to convince several companies to merge into Riverside to form one steel plant but found little interest.

Not wanting to delay, Hearne ordered steel making equipment without approval from his Board of Directors. 19 Work on the new steel production facility began on August 6, 1883. On June 11, 1884, Riverside became the second such facility in the Wheeling area to blow steel just after Bellaire Nail Works by a mere two months. 18 The plant had the capacity for 1,500 tons a week of steel blooms, billets, and slabs, which were converted into steel nails, spikes and sheet bars, and steel rods to make wire and wire nails. It sold surplus product to its competitors.

The Rise of Tubular Goods

The use of natural gas for industrial purposes began a steady rise in the late 1880’s, prompting demand for tubular goods for piping gas. 19 An increase in indoor plumbing also exaggerated demands for pipe. Riverside was the first in the area to recognize the trend and abandoned cut nail production in favor of pipe.

Hearne assembled a group of experts from the Crane Brothers Manufacturing Company of Chicago in 1887 to design and operate the area’s first pipe mill. 19 The mill was designed with the idea of using iron, but Hearne desired to use steel. Within weeks of opening the new pipe mill on August 11, 1887, Riverside produced 30 tons of steel, delivering it to their adjoining pipe mill. Despite skepticism, steel was able to be formed into pipe.

Early pipes were hand-made by slowly welding a few inches at a time. Around 1835, lapwelding was introduced, where plates of metal have their edges scarfed or beveled by being passed through a series of rolls. 15 As it was drawn through a die, the edges would curl up and overlap. The skelp, or partly made pipe, was heated a second time and welded by passing it through two rolls, the inner lap resting on a stationary mandrel. The pipe was then straightened, threaded, and tested.

Buttwelded pipes were made by drawing a heated plate through a conical die, which pressed the edges so firmly together that they united. 15 The skelp was then heated a second time and welded,straightened, threaded, and tested.

For 1898, Riverside produced 125,000 tons of finished bar steel, tack plate, and skelp, 550,000 kegs of cut nails, 150,000 tons of ignots, and 90,000 tons of wrought-iron and steel tube. 19

National Tube and Wheeling Steel

In 1899, Riverside Iron Works was acquired by the National Tube Company for $6 million. 17 19 Shortly after, National Tube constructed a 500 ton blast furnace to reduce its dependence on Carnegie Steel for raw material. 16 The facility grew to consist of two pig-iron blast furnaces, five buttweld furnaces, and two lapweld furnaces. It also had two 5 ton Bessemer converters, three 8-foot cupolas, and two 3-hole soaking pits. It was capable of 1.25 million gross tons of pipe and boiler tubes and 40,000 tons of galvanized goods per year. 15

Nearby were 120 Semet-Solvay by-product coke ovens that fueled the blast furnaces. 15

Wheeling Steel

Wheeling Steel Corporation was organized on June 21, 1920 as a successor to three prior steel companies. The company consisted of factories for 30 miles, from Benwood, West Virginia north to Steubenville, Ohio. 1

  • Ackermann Works at Wheeling, West Virginia, which produced pressed and drawn steel stampings used in the automotive and appliance industries.
  • Beech Bottom Works at Beech Bottom, West Virginia, which consisted of sheet mills for producing hot rolled electrical sheets used by electrical equipment manufacturers. It also had facilities for coating long terne sheets produced by the Yorkville Works.
  • Benwood Works at Benwood, West Virginia, which consisted of two pipe mills with slabs supplied from Steubenville Works.
  • LaBelle Works at Wheeling, West Virginia, which manufactured cut nails.
  • Martins Ferry Works at Martins Ferry, West Virginia, which produced galvanized sheets, galvanized roofing and accessories, corrugated culverts, and hand-dipped items. It featured two continuous galvanizing lines where coils of steel strips were processed, galvanized, and treated. It was sold under the SofTite brand. A second galvanizing line went into operation in November 1953 at a cost of $3 million.
  • Steubenville Works, which consisted of three integrated operations:
    • Steubenville North at Steubenville, Ohio, which featured two blast furnaces, 11 open hearth furnaces, blooming mill, hot strip mill, and cold reduction mills. It produced hot rolled sheets and plates and cold rolled sheets and coils.
    • Steubenville South at Mingo Junction, Ohio, which consisted of three blast furnaces, two Bessemer converters, blooming mill, and auxiliary equipment. It supplied hot metal for the open hearth furnaces at Steubenville North and Bessemer slabs for Benwood Works.
    • Steubenville East in Follansbee, West Virginia, which featured 314 coking ovens for Steubenville North and South.
  • Steelcrete Works, adjacent to Beech Bottom Works, manufactured expanded metal, metal lath, and accessories. It also produced Steelcrete bank vaults, reinforced mesh for buildings, stair treads, partitions, and miscellaneous items.
  • Wheeling Works at Wheeling, West Virginia, which fabricated containers, stove pipe and furnace pipe, electric and gas dryers, roofing accessories, floor and roof decking, gasoline tanks for automobiles, and miscellaneous automobile parts.
  • Yorkville Works at Yorkville, Ohio, which consisted of the first cold reduced black plate for tinning. The first tandem mill of its kind was installed in 1928. The facility produced electrolytic and hot-dipped tinplate, black plate, and terneplate. It also had a metal decorating plant for coating and lithographing tin, terne, and black plate, and two electrolytic tin plate lines that produced tin plate at up to 1,000 feet per minute.

Wheeling Steel was acquired by the Pittsburgh Steel to form the Wheeling-Pittsburgh Steel Corporation in December 1968. The merger added:

  • Allenport Works, a sheet steel plant in Allenport, Pennsylvania.
  • Monessen Works, a steel mill in Monessen, Pennsylvania.

Wheeling-Pittsburgh’s was slow to modernize its high-cost facilities and overcome downturns in the steelmaking industry in the 1980’s. A late attempt to use a pig-iron blast furnace and electric arc furnace in tandem failed when the electric arc furnace did not achieve its designed capacity. Esmark engaged in a proxy takeover for Wheeling-Pittsburgh in 2005 and took over the company in November 2007. Severstal acquired Esmark’s Wheeling-Pittsburgh holdings in August 2008, which was then acquired by RG Steel in 2011. Mass layoffs by RG Steel began in June 2012 after the company declared bankruptcy.

Changes and Decline

In April 1962, Wheeling Steel approved plans to retire the oldest of its remaining two buttweld furnaces, installed in 1909. 5 The other buttweld furnace, installed in 1949, was enlarged in 1963. The company studied the feasibility of installing an electweld mill to produce a new line of tubular products.

Slabs from Steubenville South were processed into skelp at Benwood and then formed into pipe ½” to 4″ by the continuous weld method. 1 Wheeling Steel also produced its own couplings and had facilities to galvanize large quantities of pipe. Benwood Work’s No. 2 continuous weld pipe mill produced pipe of various sizes at speeds from 450 feet to more than 1,000 feet per minute.

Foreign competition was chomping away at Wheeling-Pittsburgh’s dominance in the piping industry by the 1970’s. In September 1982, 8 Wheeling-Pittsburgh Steel notified workers that it planned to close the Benwood Works on December 15. 6 The move would result in 500 workers losing their jobs, although most had already been laid off. On December 9, the company postponed closure plans as negotiations with the United Steelworkers (USW) were underway. The USW eventually settled on a pension plan designed to shrink the workforce to 200 to 250 employees. 9

Citing deteriorating market conditions and overseas imports, Wheeling-Pittsburgh Steel closed the Benwood Works in July 1983. 14

In April 1986, the USW announced that it had entered into the second phase of a proposed employee buyout of the Benwood Works. 11 The union looked at forming a management team and overtake the idled factory. The plan, developed by American Capital Strategies, called for Benwood Works to reopen and manufacture tubular products for the oil industry, even though Wheeling-Pittsburgh Steel specifically cited a lack of market for that industry.

In July, officials from Kao Hsing Chang Iron and Steel Company of Taiwan toured Benwood Works with representatives from the USW with hopes that the overseas corporation would be pursuaded in acquiring the plant. 7 With no resolve, Laclede Steel entered into negotiations in March 1987 with Wheeling-Pittsburgh Steel to lease a part of Benwood Works. Laclede planned to process pipe made at its Alton, Missouri factory. 13

Wheeling-Pittsburgh Steel agreed to sell Benwood Works in August to BIPCO, a local investment group, for $1.35 million. 10 BIPCO planned to redevelop the site as an industrial park.

One of the last remaining abandoned structures at the Benwood Works was leased by JLE Industries in July 2016. 2 JLE acquired the space to inspect and repair metal tubes used to drill oil and natural gas wells. JLE refurbished all overhead cranes, added new siding and insulation, poured new concrete flooring, and revamped the electrical system at a cost of $6 million. 3